 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 242 cf card connector ma type 1.27mm pitch/50-circuit cf card connector emboss tape ?socket / dual-row straddle type, smt type ?card frame / for type cards ?adapter / for type , cards ?header / for type , cards ?ejector / for type , cards in addition to the connectors applicable to cf type cards, those for cf type cards are also available. specifications ? pitch: 1.27mm ? type: dual-row at mating section ? current rating: 0.5a ac, dc/line ? temperature range: - 20 ? c to + 60 ? c ( including temperature rise in applying electrical current) ? contact resistance: initial value/40m ? max. after environmental testing/20m ? max. (variation from initial value ) ? insulation resistance: 1,000m ? min. 500v dc (except for adapter cards) ? withstanding voltage: 500v ac/minute (except for adapter cards) ? mating/unmating life: 10,000 cycles ? conforms to cfa. * rohs compliant products are published. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. ? ? ? ? (pattern pitch) ? (pattern width) ? ? ? ? ? ? ? ? (pattern pitch) ? (pattern width) ? ? ? ? for type cards / stand off 0mm normal type / reverse type for type cards / stand off 1.64mm normal type / reverse type pc board layout (viewed from component side)
243 243 ? ? ? ? ? ? ? (pattern pitch) (pattern width) ? ? y ? ? y y ? (pattarn pitch) (pattarn width) ? ? ? ? ? ? ? ? ? ? ? ? ? y y y ? for type cards / stand off 0mm normal type reverse type space-saving type for type cards / stand off 0mm normal type/ reverse type ejector mounted header with shutter for type cards reverse type (stand off 0mm) ? ? ? ? ? ? y y ? ? ? ? ? ? ? ? y ? ? ? ? ? ? ? ? y (pattern pitch) (pattern width) ? ? ? ? ? ? ? ? ? ? ? ? reinforcement pitch ? components cannot be mounted inside of this area. y y ? (pattern pitch) (pattern width) ? ? ? ? ? ? ? ? components cannot be mounted inside of this area. ? ? ? ? ? ? ? ? ? ? ? 3 through-holes space-saving type for type cards / stand off 0mm normal type reverse type cf card connector ma type 244 244 cf card connector ma type circuit no.1 no.1 mark t ail length rib length circuits q'ty/box material and finish model no. icm-ma50s-ts12-3032 off-set dimension solder tail dual-row straddle type center rib length (mm) n n tail length (mm) n n grounding spring with (circuit no.1, no.26) contact: copper-alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) grounding spring: copper alloy nickel-undercoated, gold-plated housing: lcp, ul94v-0, black icm-ma50s-ts12-3021 dual-row straddle type off-set amount circuit no.1 circuit no.2 circuit no.1 circuit no.26 circuit no.50 circuit no.25 no.1 mark t ail length rib length icm-ma50s-ts12-3022 off-set amount circuit no.1 circuit no.2 circuit no.1 circuit no.26 circuit no.50 circuit no.25 no.1 mark t ail length rib length smt type rohs compliance this product displays (lf)(sn) on a label. socket 245 cf card connector ma type off-set amount circuit no.1 circuit no.2 circuit no.1 circuit no.26 circuit no.50 circuit no.25 no.1 mark t ail length rib length smt type icm-ma50s-ts12-3023 contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) grounding spring: copper alloy, nickel-undercoated, gold-plated housing: lcp, ul94v-0, black icm-ma50s-ts12-3021t icm-ma50s-ts12-3022t icm-ma50s-ts12-3023t icm-ma50s-ts12-3024t icm-ma50s-ts12-3026t smt type circuits q'ty/reel tail length (mm) material and finish model no. rib length (mm) n n n n n n n n n n n n n n n n n n n n off-set dimension (mm) solder tail grounding spring n n n n n n n n n n with (circuit no.1, no.26) off-set amount circuit no.1 circuit no.2 circuit no.1 circuit no.26 circuit no.50 circuit no.25 no.1 mark t ail length rib length off-set amount circuit no.1 circuit no.2 circuit no.1 circuit no.26 circuit no.50 circuit no.25 no.1 mark t ail length rib length icm-ma50s-ts12-3024 icm-ma50s-ts12-3026 rohs compliance this product displays (lf)(sn) on a label. socket 246 246 cf card connector ma type circuit no.1 circuit no.26 circuit no.25 circuit no.50 - circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l circuit no.1 circuit no.26 circuit no.25 circuit no.50 - circuits type model no. q'ty / box material and finish icm-ma50h-ss52-1151 icm-ma50h-ss52-1171 normal reverse contact: phosphor bronze, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0 solder tab: brass, copper-undercoated, tin-plated (reflow treatment) normal type (stand off 0mm) reverse type (stand off 0mm) circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l rohs compliance this product displays (lf)(sn) on a label. header (for type cards) 247 cf card connector ma type - circuit no.25 circuit no.50 circuit no.1 circuit no.26 - circuit no.50 circuit no.26 circuit no.1 circuit no.25 circuits type model no. q'ty / box material and finish icm-ma50h-ss52-1141 icm-ma50h-ss52-1161 normal reverse contact: phosphor bronze, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0 solder tab: brass, copper-undercoated, tin-plated (reflow treatment) normal type (stand off 1.64mm) reverse type (stand off 1.64mm) circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l rohs compliance this product displays (lf)(sn) on a label. header (for type cards) 248 248 cf card connector ma type - $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p circuits type model no. q'ty / box material and finish icm-ma50h-ss52-1184 normal reverse contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0, black solder tab: copper alloy, nickel-undercoated, tin-plated (reflow treatment) $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p # v u u p o t u s p l f $ b s e t u s p l f 4 i v u u f s t u s p l f reverse type (stand off 0mm) circuits type model no. q'ty / box material and finish icm-ma2sl-sd12-rl31 reverse contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing/ guide bar/ push button: pps, ul94v-0, black lock/ rotation arm/ push bar: stainless frame: stainless, selective nickel-undercoated, tin/copper alloy-plated circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l rohs compliance this product displays (lf)(sn) on a label. rohs compliance this product displays (lf)(sn) on a label. normal , reverse types (stand off 0mm ) header (for type cards) / space-saving type ejector mounted header with shutter (for type cards) 249 rohs compliance this product displays (lf)(sn) on a label. - $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p $ j s d v j u / p circuits type model no. q'ty / box material and finish icm-ma2h-ss52-n11b icm-ma2h-ss52-r21a normal reverse contact: phosphor bronze, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0, black solder tab: phosphor bronze, copper-undercoated, tin-plated (reflow treatment) contact: phosphor bronze, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: lcp, ul94v-0, black solder tab: phosphor bronze, copper-undercoated, tin-plated (reflow treatment) reverse type (stand off 0mm) circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l - circuit no.26 circuit no.1 circuit no.50 circuit no.25 normal type (stand off 0mm ) circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l header (for type cards) cf card connector ma type 250 250 cf card connector ma type circuits type model no. q'ty / reel material and finish icm-ma2h-ss52-n13lt icm-ma2h-ss52-r13ht normal reverse contact: phosphor bronze, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0 solder tab: brass, copper-undercoated, tin-plated (reflow treatment) normal type (stand off 0mm) circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l - circuit no.26 circuit no.50 circuit no.1 circuit no.25 - circuit no.50 circuit no.26 circuit no.25 circuit no.1 reverse type (stand off 0mm) circuit no. dimensions (mm) ? ? ? ? ? ? ? dimension l rohs compliance this product displays (lf)(sn) on a label. this products listed above are supplied on embossed-tape. header (for type cards) / space-saving type 251 card stroke button stroke card stroke button stroke right button left button type model no. q'ty / box material applicable header icm-mae-r01 icm-mae-l01 right button left button frame/ rotation arm : stainless push button: pps, ul94v-0, black * $ . . " ) 4 4 * $ . . " ) 4 4 * $ . . " ) 4 4 * $ . . " ) 4 4 button stroke card stroke left button type model no. q'ty / box material and finish applicable header icm-mae-l91nd reverse (left button) frame: stainless, nickel-undercoated, tin/copper alloy-plated rotation arm: stainless push button: synthetic resin, ul94v-0, gray * $ . . " ) 4 4 rohs compliance applicable headers display (lf)(sn) on a label. rohs compliance this product displays (lf) on a label. an applicable header displays (lf)(sn) on a label. ejector (for type header) ejector mounted header (for type header) / space-saving type cf card connector ma type 252 252 cf card connector ma type button stroke card stroke button stroke card stroke circuit no.50 circuit no.26 circuit no.25 circuit no.1 button stroke card stroke for normal type header (left button) for reverse type header (right button) for normal type header (right button) type model no. q'ty / box material applicable header icm-mae-l33 icm-mae-r32 icm-mae-r21a for normal type header (left button) for normal type header (right button) for reverse type header (right button) frame/ rotation arm/ push bar/ push plate/ button shaft: stainless push button: pbt, ul94-0, black(r32), gray(l33) frame/ rotation arm/ push bar: stainless push button: pps, ul94-0, black * $ . . " ) 4 4 / # * $ . . " ) 4 4 3 " rohs compliance icm-mae-l33/icm-mae-r32 display (n) on a label. applicable headers display (lf)(sn) on a label. ejector (for type header) 253 253 cf card connector ma type for normal type header (stand off 0mm) left button for reverse type header (stand off 0mm) right button type q'ty / box model no. material and finish applicable header for normal type header (stand off 0mm) left button for normal type header (stand off 0mm) left button, push-push for reverse type header (stand off 0mm) right button for reverse type header (stand off 0mm) left button, push-push rotation arm/push bar/push plate/ frame: stainless button: pbt, ul94v-0, gray arm: stainless push button: synthetic resin, ul94v-0, black frame: stainless, selective nickel-undercoated, tin/copper alloy-plated rotation arm/push plate: stainless button: pbt, ul94v-0, black frame: stainless, selective nickel-undercoated, tin/copper alloy-plated * $ . . " ) 4 4 / - * $ . . " ) 4 4 / - 5 * $ . . " ) 4 4 3 ) 5 rotation arm/push bar/push plate/ frame: stainless clinched button: synthetic resin, black frame: stainless, selective nickel-undercoated, tin/copper alloy-plated icm-mae-l73fa icm-ma2ep-l520a icm-mae-r66c3 icm-ma2ep-l810e for normal type header (stand off 0mm) left button/push-push type for reverse type header (stand off 0mm) left button/push-push type button stroke card stroke button stroke card stroke circuit no.1 circuit no.25 circuit 26 circuit 50 card stroke card stroke rohs compliance icm-mae-r66c3 display (lf) on a label. icm-ma2ep-l520a/icm-ma2ep-l810e display (lf) on a label. applicable headers display (lf)(sn) on a label. ejector (for type header) / space-saving type 254 254 cf card connector ma type (component assembling area) (component assembling area) (glue position) (component assembling area) (component assembling area) (glue position) frame a frame b icm-ma50f-a/b-fb-c circuits model no. as a set (frame a + frame b) icm-ma50f-a/b-fb-ca q'ty / box material applicable socket icm-ma50s-ts12-3032 icm-ma50s-ts12-3023t frame: glass-filled pbt, ul94v-0 cover: stainless rohs compliance card frame (for type cards) 255 255 cf card connector ma type n b y model no. q'ty / box material and finish 68-circuits side socket contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0 cover: stainless frame: pbt, ul94v-0 pc board: glass-epoxy, ul94v-0 contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: lcp, ul94v-0 ( s p v o e j o h t q s j o h : copper alloy, nickel-undercoated, gold-plated icm-ma50a-c441n 50-circuits side header 68-circuits side 50-circuits side for cf type rohs compliance this product displays (lf)(sn) on a label. adapter card 256 cf card connector ma type 256 n b y model no. q'ty / box material and finish contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0 cover: stainless frame: pbt, ul94v-0 pc board: glass-epoxy, ul94v-0 contact spring: copper alloy shutter: pps, ul94v-0 spring: stainless lock: stainless contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: lcp, ul94v-0 grounding spring: copper alloy, nickel-undercoated, gold-plated icm-ma2a-c454n 50-circuits side header 68-circuits side socket 68-circuits side 50-circuits side for cf type n b y model no. q'ty / box material and finish contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: pps, ul94v-0 cover: stainless frame: pbt, ul94v-0 pc board: glass-epoxy, ul94v-0 contact spring: copper alloy shutter: pps, ul94v-0 spring: stainless lock: stainless contact: copper alloy, nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) housing: lcp, ul94v-0 grounding spring: copper alloy, nickel-undercoated, gold-plated icm-ma2a-cl454n 50-circuits side header 68-circuits side socket 68-circuits side 50-circuits side for cf type rohs compliance this product displays (lf)(sn) on a label. rohs compliance this product displays (lf)(sn) on a label. adapter card cf card connector ma type taping specifications feeding direction feeding direction ( 13) cover tape carrier tape 58.0 2.0 0.5 380 2.0 1.55 0.05 4.0 0.1 2.0 0.1 1.75 0.1 52.4 0.1 26.2 0.1 56.0 0.3 12.0 0.1 feeding direction cover tape leader carrier tape the end part 160min. connector mounting part 400min. leader part 100min. +2.5 ?.0 cover tape carrier tape feeding direction 1.55 0.05 1.75 0.1 26.2 0.1 52.4 0.1 56.0 0.3 cover tape carrier tape 16.0 0.1 feeding direction 1.55 0.05 4.0 0.1 1.25 0.1 1.75 0.1 26.2 0.1 52.4 0.1 56.0 0.3 socket/smt type q'ty / reel: 1,500 q'ty / reel: 750 q'ty / reel: 750 for cf type ? cards/space-saving type header normal type (stand off 0mm) reverse type (stand off 0mm) note: 1. specifications conform to jis c 0806. the tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. note: 2. specifications are subject to change without prior notice. |
Price & Availability of JSTMFGCOLTD-ICM-MA50S-TS13-5024
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |